[Iccrg] Too-big buffers in routers
Woundy, Richard
Richard_Woundy at cable.comcast.com
Wed Jul 29 10:01:13 BST 2009
Also look at http://www.imconf.net/imc-2007/papers/imc137.pdf. See Figure 13 on page 10, especially the DSL and cable upstream queue length measurements.
I suspect there would be different results for some operators today, compared to 2007, because some operators have increased their upstream speeds (and overall upstream capacity) but with the same modem upstream queue lengths. (As one example, Comcast raised their typical upstream speed from 384k to 1 Mbps and higher in 2008.)
-- Rich
________________________________
From: iccrg-bounces at cs.ucl.ac.uk on behalf of Lars Eggert
Sent: Wed 7/29/2009 4:37 AM
To: John Leslie
Cc: iccrg IRTF list
Subject: Re: [Iccrg] Too-big buffers in routers
On 2009-7-29, at 10:05, John Leslie wrote:
> I'd like to pose the question whether we've got any research project
> to _locate_ routers which buffer "too much".
http://netalyzr.icsi.berkeley.edu/ tells end users about their
buffers. Nothing stops operators from running it, too.
Lars
More information about the Iccrg
mailing list